Model：HK-GDW-100
Constant temperature and humidity box (small model)
Constant temperature and humidity box to meet the technical standard: provide various industrial parts, main accessories, semi-finished products such as: electronic parts, auto parts, notebook computers, etc The reliability, temperature and humidity environment test shall be designed and manufactured according to the technical conditions of gb10586-89 damp heat test chamber, and shall conform to GB / t2423.1-93 test procedures for electrical and electronic products, low temperature test methods; GB / t2423.2-89 test procedures for electrical and electronic products, high temperature test methods; GB / t2423.3-89 test procedures for electrical and electronic products, constant damp heat test methods and GB / t2423.4-89 alternating damp heat test. It is applied to simulate environment test of communication electronics, electrical appliances, automobile, motorcycle parts and other product parts
可程式恒溫恒濕箱技術參數：
|
型號 |
HK-GDW-100 |
HK-GDW-150 |
|||
|
工作室尺寸:mm(W*H*D) |
400×500×400 |
400X500X500 |
500×600×750 |
||
|
外型尺寸 :mm(W*H*D) |
930×1650×960 |
930X1650X1030 |
1280×1950×1380 |
||
|
技術 |
溫度范圍 |
-20 ℃ (B 型)、 -40 ℃ （C 型）、 -60 ℃ （D 型）、 -70 ℃ （E 型）~ +130 ℃(+150 ℃ ) |
|||
|
溫度均勻度 |
≤ 2 |
||||
|
溫度波動度 |
± 0.5 ℃ |
||||
|
濕度范圍： |
25%～98%R.H |
||||
|
濕度均勻度： |
±2%R·H |
||||
|
濕度波動度： |
±2%R·H |
||||
|
加 濕 器： |
淺槽式不銹鋼加濕器，控制迅速且穩定，供給加濕水采用自動補水功能。 |
||||
|
升降溫速率 |
0.7 ～ 1 ℃ /min (3 ℃ /min 、 5 ℃ /min 、 10 ℃ /min) |
||||
|
配置 |
保溫材料 |
玻璃纖維棉 / 硬質聚胺脂發泡 |
|||
|
冷卻器 |
多級膜片式蒸發器 |
||||
|
空氣循環 |
單循環、加長軸、不銹鋼離心風葉 |
||||
|
制冷方式 |
單元制冷方式 / 雙元 ( 復疊 ) 制冷方式 |
||||
|
壓縮機 |
法國“泰康”全封閉制冷壓縮機 |
||||
|
控制 |
控制儀 |
進口韓國液晶觸摸屏控制儀 |
|||
|
傳感器 |
PT100 鉑金電阻 |
||||
|
安保裝置 |
漏電保護、缺水保護、超溫保護、快速保險絲、壓縮機過壓保護 |
||||
|
標準配置 |
內熱式中空玻璃觀察窗： 250X300(mm) 一個 , 測試孔￠ 50mm 一個，樣品架 2 付，照明燈一只 |
||||
|
電源 |
220V · 50Hz/380V · 50Hz |
||||
Features of constant temperature and humidity box:
Perfect modeling design: constant temperature and humidity box arc modeling and fog surface line processing, high texture appearance, and the use of planar non reaction handle, easy to operate, safe and reliable. The large rectangular observation window with bright and wide field of vision adopts fluorescent lamp to keep the light in the box, and uses the heat internal inlaid glass to keep clear observation of the condition in the test box at any time without the need of rain brush demisting.
Dehumidification system pipeline and control circuit separation: dehumidification system pipeline and power supply, controller, circuit board separation, can avoid pipeline water leakage and affect the circuit, improve safety.
The power wiring base and time signal base for test are both located in the lower part of the left side of the box (rated current 2a).
Simple and automatic water supply device: the water supply tank is located at the lower part in front of the test box, which is convenient for supplementary water supply (capacity is about 20L).