Model：HK-DDW-1
I. instrument introduction:
The micro drop test machine is suitable for repeated drop test of small electronic consumer products such as mobile phones, telephone receivers, walkie talkies, MP3, CD, electronic dictionaries, etc.
II. Design principle:
The lifting motor drives the upper clamp (air finger) down to clamp and lift the mobile phone, release the air finger, and the mobile phone will fall freely. At this time, the double acting cylinder telescopes and pushes the mobile phone to the position that the upper clamp can clamp. The lifting motor drives the upper clamp (air finger) down to clamp and lift the mobile phone, and birch open the air finger. The mobile phone will fall freely, so repeatedly until the set number of times.
技術參數：
|
同時跌落手機 |
1-2臺 |
|
允許試件重量 |
2kg(max) |
|
跌落最大尺寸 |
100X160mm |
|
跌落高度 |
60-150ｍｍ |
|
測試速度范圍 |
6～20次/min |
|
PLC控制器及觸摸屏 |
1套 |
|
機器尺寸 |
W420*H800*D370mm |
|
機器重量 |
約80kg |
|
氣源 |
≥0.5Mpa |
|
電源 |
AC 220V 或指定 |
|
備注 |
制作部分電氣與主體為一體式 |
III. features:
It can set the height and times, and stop automatically,
Drop surface material: aluminum, 12mm thick. Six reset cylinders are used at the drop.
Prompt function: it can set the setting value of key times and automatically stop the test.
This machine adopts Japanese stepping motor, SMC cylinder as the driving source of lifting and dropping of mobile phone, with precise double acting cylinder as return action, durable use; it can realize repeated dropping of mobile phone and other products, so as to test the impact resistance of products falling from a certain height;
Due to the use of pneumatic components and autocratic control mode, greatly improve the test speed and consistency; use LCD touch-screen Japanese PLC as the action program control; independent counting, reaching the set number of times to automatically stop the test